User`s manual

P
r
eli
mi
n
a
ry
show <command type>
SANbox-8/16 Switch Management
User’s Manual 59010-06 Rev. A Telnet
3-11
Non-I (non-interleaved),
Min-I (minimize-interleave),
Frame-L (frame limit)
counts <port #>
The description of the counters displayed by this command are described in Refer
to Appendix B, .The command returns a display similar to the following:
port_num = 0000000x
fcFPortC23InFrames :00000000
fcFPortC23OutFrames :00000000
fcFPortC23Discards :00000000
fcFPortC23FbsyFrames :00000000
fcFPortC2FrjtFrames :00000000
fcFPortLinkFailures :00000000
fcFPortSyncLosses :00000000
fcFPortPrimSeqProtoErrors :00000000
fcFPortFPortInvalidTxWords :00000000
fcFPortInvalidCrcs :00000000
fcFPortDelimiterErrors :00000000
fcFPortAddressIdErrors :00000000
fcFPortLinkResetIns :00000000
fcFPortLinkResetOuts :00000000
fcFPortOlsIns :00000000
fcFPortOlsOuts :00000000
total_lip_rcvd_cnt :00000000
lip_nrml_no_al_pa_cnt :00000000
lip_err_no_al_pa_cnt :00000000
lip_nrml_has_al_pa_cnt :00000000
lip_err_has_al_pa_cnt :00000000
lip_reset__cnt :00000000
al_init_err_cnt :00000000
ecounts
This command returns a display similar to the following:
RX Overrun Errors :00000000
TX Fatal Errors :00000000
Get Packet Calls :0001D345
Send Packet Calls :00002995
Packets Received :0001D344
Packets Transmit :00002995
Receive Packet Fails :00000000
Transmit Packet Fails :00000000
TX Allocate Complete :00002995
TX Allocate Timeout :00000000
TX Allocate Retries :00000000
MMU Resets :00000000
Invalid Tx :00000000