User`s manual

P
r
eli
mi
n
a
ry
User Administration Window
SANbox-8/16 Switch Management
User’s Manual 59010-06 Rev. A SANsurfer Switch Management
2-103
There are three levels of authority;
Guest A Guest user may view any fabric but may not apply (save) any changes.
Admin An Administrative user may do anything but modify user list information.
SuperUser A Super User may do anything.
Modify this field by selecting the field content and typing new information.
Created
The Created field is read-only and displays the date that the entry was created.
Modified
The Modified field is read-only and displays the date that the entry was modified.
PW Expire
The Password Expire field contains the date that the user password expires.
Modify this field by selecting the field content and typing new information. The
dates must be in the form month#/day#/four-character year.
Acnt Expire
The Account Expire field contains the date that the user account expires. The user
will not be able to log in after that date. Modify this field by selecting the field
content and typing new information. The dates must be in the form month#/day#/
four-character year.
Wd
The Screen Width field contains the width in pixels of the work station monitor.
Modify this field by selecting the field content and typing new information.
The value assigned to each user can vary, depending on the information being
viewed. The assigned value becomes active at user login.
Ht
The Screen Height field contains the height in pixels of the work station monitor.
Modify this field by selecting the field content and typing new information.
The value assigned to each user can vary, depending on the information being
viewed. The assigned value becomes active at user login.
NOTE:
When selecting the width and height settings for the management station,
remember that higher pixel counts will result in smaller letters and icons, but
column headings, counter names, and other fields will not be truncated as severely
as with lower pixel counts.