User`s manual

P
r
eli
mi
n
a
ry
Switch Faceplate Display (Special>Reset)
SANbox-8/16 Switch Management
User’s Manual 59010-06 Rev. A SANsurfer Switch Management
2-75
Switch Faceplate Display (Special>Reset)
Special>Reset allows resetting the selected Switch chassis.
Choosing Reset
Reset the selected Switch chassis by choosing Special>Reset while in the Switch
Faceplate displays. The application resets the selected Switch chassis immediately.
NOTE:
The SANsurfer application is embedded in the SANbox memory. It will not launch
from a chassis that is inoperable such as a chassis with a Flash Checksum error.
Therefore if SANsurfer was launched prior to the Switch failure, or if you have the
capability to launch SANsurfer from another chassis that is operable, you may then
use it to load new Flash code. If SANsurfer is not operable, use TFTP to load new
Flash code.