User`s manual

Preliminary
Index
SANbox-16STD Fibre Channel Switch
2 Index 59012-03 Rev. A Installer’s/User’s Manual
cascade 5-7
mesh 5-9
multistage 5-12
E
emissions standards A-5
enclosure types A-4
environmental specifications A-4
error codes
Arbitrated Loop Test Failure (13 Blinks) 3-7
Complete Failure 3-7
Ethernet Port Failure (4 blinks) 3-5
Ethernet Port Tests Good (3 blinks) 3-5
Force PROM Mode in Effect (5 Blinks) 3-5
GBIC Bypass Test Failure (7 Blinks) 3-5
Hung Flash Control Code 3-7
NVRAM Test Failure (15 Blinks) 3-7
Port Loop-back Test Failure (8 blinks) 3-6
PROM Checksum Failure (1 blink) 3-4
RAM Failure (2 blinks) 3-4
Switch ASIC Test Failure (6 Blinks) 3-5
Switch Auto-Route Test Failure (10 Blinks) 3-7
Switch Bus Test Failure (9 Blinks) 3-6
Switch Management Port Failure (14 Blinks) 3-7
Ethernet
configuration 2-18
connector 1-10, A-4
F
F_Port
configuration 2-19
description 1-2
fabric
aggregate bandwidth A-3
component 1-1
latency A-3
management 1-11, A-4
point-to-point bandwidth A-3
Fabric Loop Port - See FL_Port.
Fabric Port
configuration 2-19
description 1-2
overview 1-3
Fabric Port - See F_Port.
fabric size
cascade 5-6
mesh 5-8
multistage 5-11
Fan Fail LED 1-20
FC-PLDA - See Fibre Channel-Private Loop SCSI Direct
Attach.
fiber optic connection
description 2-13
T_Port 5-16
fibre channel
ports 1-17
protocols A-2
Fibre Channel Port Loop-back Test Failure 3-6
Fibre Channel-Private Loop SCSI Direct Attach standard
1-4
Field Replaceable Unit 1-8, 4-1, A-3
FL_Port
configuration 2-19
description 1-2
forced to operate as F_Port 2-9
Flash Checksum Failure/Ethernet Port Failure 3-5
Flash Checksum Failure/Ethernet Port Good 3-5
Force PROM Mode in Effect 3-5
frame
limit tuning 2-21
size 1-2, A-3
front panel
controls 1-19
LEDs 1-20
FRU - See Field Replaceable Unit.
fuse
part number A-4
removal 4-1
replacement 4-2
type A-4
G
GBIC - See GigaBit Interface Converter
GBIC Bypass Port Loopback Test Failure 3-5
GigaBit Interface Converter
copper inter-enclosure specifications A-6
copper intra-enclosure specifications A-7
hot-pluggable 2-12
installation 2-6
longwave laser specifications A-6
population 1-3
removal 4-3
replacement 4-4
shortwave laser specifications A-6
types certified 1-18
H
hard zone 1-12, 2-22
hardware support B-2
harmonics A-5
Heartbeat LED
description 1-20
failure blink patterns 3-4
normal operation 3-4
heat output A-5
help desk B-1