User`s guide

ix
Contents
1. SunStorEdge Network FC Switch-8 and Switch -16 SwitchOperations—Switch
3.0 1
0.1 Introduction 1
0.2 Product Software Installation 2
0.2.1 Minimum System Requirements 3
0.2.2 Firmware Download 3
0.2.3 Upgrading the GUI 3
▼ To Remove the 2.0 GUI 4
▼ To Install the 3.0 GUI Software 4
▼ To Install the 3.0 GUI Patch 5
▼ To Start the GUI Software 5
▼ To Use the Command Line 5
▼ To Use Component Manager 2.2. 5
▼ To Verify the Flash 6
▼ To Verify the Firmware Revision Level of the switch(es): 6
▼ To Load the Flash 7
0.3 Removal and Replacement of FRUs By Service Providers 8
0.4 Power-On-Self-Test (POST) 8
0.4.1 POST Diagnostics 8
0.5 Troubleshooting 9