User`s guide

-32 Sun StorEdge network FC switch-8 and switch-16 Operations Guide • August 2001
▼ To Add a Host to an Existing Zone or Switch
(Non disruptive)
● Add the port that contains the host to the zone.
See the SANbox 8/16 Switch Management User’s Manual.
0.7.4 Verifying the Results
Verifying that the service or system administrators techniques were successful is
different for the software package and patches and the device driver packages.
0.7.4.1 Verifying the Software Package Installation
You can use pkginfo -l <packagename> to see which driver packages have been
installed on the system.
0.7.4.2 Firmware
You can check which firmware revision has been installed from the switch GUI.
For more information on Fibre Channel and troubleshooting the switch, see the Sun
StorEdge network FC switch-8 and switch-16 Troubleshooting Guide.