User`s guide

-28 Sun StorEdge network FC switch-8 and switch-16 Operations Guide • August 2001
FIGURE 0-1 Moving a Port with Disk Array—Switch with Two Hosts and Two Zones
▼ To Prepare the System
1. Unmount all the filesystems mounted on the devices present on that port.
2. Unconfigure and update the applications that were using the devices on that port.
3. Bring down all the hosts present in Zone 1.
▼ To Remove the Port
1. Using the SANSurfer application launched from another host, remove the port
from Zone 1.
See SANbox 8/16 Switch Management User’s Manual.
Switch
Array Array
Array
Array
Array
Array
Array
Array
Host Host
Zone 1
Zone 2