User`s guide

Sun StorEdge Network FC Switch-8 and Switch -16 Switch Operations—Switch 3.0 -23
■ Both the switches to be replaced within the Fabric have had catastrophic failures
and you have a copy of the Fabric archive and zoning template.
■ Both switches have had catastrophic failures and you do not have an archive of
the Fabric or a zoning template. settings.
▼ To Replace the Switches When Both Are Responding to the
SANsurfer GUI
The First Switch
1. Launch the SANsurfer and connect to the switch.
See “To Replace a Switch in a Two-Switch Fabric” on page 14 and follow the steps
for launching and connecting.
2. Save the settings.
See “To Replace a Switch in a Two-Switch Fabric” on page 14 and follow the steps
for saving the settings.
3. Replace the switch.
See “To Replace a Switch in a Two-Switch Fabric” on page 14 and follow the steps
for replacing the switch.
4. Restore the saved settings.
See “To Replace a Switch in a Two-Switch Fabric” on page 14 and follow the steps
for restoring the saved settings. The settings restored are from saved configuration
files.
The Second Switch
5. Launch the SANsurfer and connect to the switch.
See “To Replace a Switch in a Two-Switch Fabric” on page 14 and follow the steps
for launching and connecting.
6. Replace the switch.
See “To Replace a Switch in a Two-Switch Fabric” on page 14 and follow the steps
for replacing the switch.
7. Restore the saved settings.
See “To Replace a Switch in a Two-Switch Fabric” on page 14 and follow the steps
for restoring the saved settings. The settings restored are from saved configuration
files.