User`s guide

Sun StorEdge Network FC Switch-8 and Switch -16 Switch Operations—Switch 3.0 -19
4. Select Return to Fabric Screen from the View menu.
5. Click the Sun logo in the status column.
6. Click the Zoning button to enter the Zoning window.
7. From the Special pull-down menu, select the Save Template to File option.
Select a unique .tp2 file name to save the zoning template.
Zoning settings for all the switches in the Fabric are collected and stored.
8. Click the Back button to return to the Topology window.
▼ To Replace the Switch
1. Turn off the power to the switch.
2. Within SANsurfer, highlight the switch you just powered off, and click the Delete
button to confirm the deletion of the switch.
3. Label all the cables for replacement.
4. Disconnect all the Fibre cables and remove all the GBICs from their ports.
5. Disconnect the Ethernet cable.
6. Disconnect all the power cables [to the switch?].
7. Remove the old switch and write down the serial numbers.
▼ To Configure the Network for a Replacement Switch
1. Reconfigure the host IP address.
a. Save the workstations network configuration information by typing:
b. Verify the saved information by typing:
c. Reconfigure the workstations IP address and netmask by typing:
# ifconfig -a > /tmp/save_address
# cat /tmp/save_address
# ifconfig hme0 10.0.0.2 netmask 255.0.0.0 up