User`s guide

Sun StorEdge Network FC Switch-8 and Switch -16 Switch Operations—Switch 3.0 -11
SNMP CONFIGURATION
Name: Switch IP address
Contact: snmp contact string, if configured
Location: snmp location string, if configured
Trap Address: IP address to send traps to
Read Community: Read Community String
Write Community: Write Community String
Trap Community: Trap Community String
Switch description: SysDesc, (programmed at the factory)
Switch Object ID: SysObjectId, (programmed at the factory)
Stage Type & Time Out Values
Active:
Chassis Stage Type: Operating mode of the switch, I O Transfer (normal), Cross
Connect, or Hub Emulation
Timeout Values:
edtov: Value in milliseconds of Fibre Channel ED_TOV
mfstov: Timeout in milliseconds, port will lock on to a source, when running
Non-Interleave Sequence mode.
ratov: Value in milliseconds of Fibre Channel RA_TOV
rttov: Value in milliseconds of Fibre Channel RT_TOV
Port Tuning
For each port, tuning mode is indicated, as follows:
Normal - No tuning selected
NON-I - Do not interleave sequences
MIN-I - Minimize interleave of sequences
FRAME-L - Limit frames transmitted per loop open