User`s guide

Sun StorEdge Network FC Switch-8 and Switch -16 Switch Operations—Switch 3.0 -3
0.2.1 Minimum System Requirements
See the updated Sun StorEdge Network FC Switch-8 and Switch-16 Release Notes posted
on this site for information on minimum system requirements and required Solaris 8
patches.
Your system must meet minimum requirements before proceeding with switch GUI
or firmware upgrade. Note that the StorTools diagnostics package listed in the
minimum system requirements is optional, and is not required for switch operation.
0.2.2 Firmware Download
Information on how to download the firmware can be found in the Switch
Management Users Manual, pages 2-42 and 3-7.
If an earlier version of the Sun StorEdge FC Switch SANSurfer GUI has been
installed in the system, you must perform a package remove before you install the
Sun StorEdge FC Switch 3.0 GUI.
Current switch GUI, FW and docs are posted at the Sun Download Center, accessible
by going to
http://www.sun.com/storage/san/
and clicking the Software/Firmware Upgrades and Documentation link.
0.2.3 Upgrading the GUI
If the Sun StorEdge FC Switch 2.0 (Version 2.07.50) or 2.1 (Version 2.07.54) GUI has
been installed in the system, you must perform a package removal before you install
the Sun StorEdge FC Switch 3.0 GUI.
Note – If you have the patch for the Sun StorEdge FC Switch 3.0, you can update
your version using patchadd.