User`s guide

x Sun StorEdge network FC switch-8 and switch-16 Operations Guide • August 2001
0.5.1 Capture 9
0.5.1.1 Synopsis 9
0.5.1.2 Description 9
0.6 Sun StorEdge A5200 Array 13
0.7 Switch Replacement 14
▼ To Replace a Switch in a Two-Switch Fabric 14
▼ To Change the Chassis ID 15
▼ To Save the Settings 16
▼ To Replace the Switch 16
▼ To Restore the Saved Settings 17
▼ To Replace a Switch in a Single-Switch Fabric 18
▼ To Save the Settings 18
▼ To Replace the Switch 19
▼ To Configure the Network for a Replacement Switch 19
▼ To Use the Force PROM Button for the 16-port switch. 20
▼ To Use the Test Mode Switch for the 8-port Switch 20
▼ To Install the New Switch 21
▼ To Restore the Saved Settings 22
▼ To Replace Both Switches in a Two-Switch Fabric 22
▼ To Replace the Switches When Both Are Responding to the
SANsurfer GUI 23
▼ To Replace the Switches When One of the Switches Within the
Fabric is Responding to the SANsurfer GUI 24
▼ To Replace the Switches When One of the Switches Is
Responding to the SANsurfer GUI 24
▼ To Replace the Switches When Both Switches Have Had
Catastrophic Failures—Saved Settings 25
▼ To Replace the Switches When Both Switches Have Had
Catastrophic Failures—No Saved Settings 26
0.7.1 Moving a Port with a Disk Array From One Zone to Another 27