Installation guide
Table Of Contents
- Contents
- Using UNIX Commands
- Typographic Conventions
- Shell Prompts
- Related Documentation
- Accessing Sun Documentation Online
- Sun Welcomes Your Comments
- New Features
- Features, Benefits, and Products
- SAN 4.0 Device Names
- On-Demand Node Creation
- Fabric Connection of Hosts
- Cascading of Switches
- Higher Realized Bandwidth
- Support of Multiple Protocols
- Support for More, Heterogeneous Storage Devices
- Support for New Hardware and Software
- Software and Hardware Upgrade
- Building Blocks for More Complex Topologies
- Overall Installation Order
- Configuring the Switch Ethernet Port
- Installing SAN Software for the First Time
- Upgrading Existing SAN Software

Appendix A Alternate Installation of a New SAN 23
5. Install the SAN Foundation Kit SUNWsan patch 111847-04.
Use the patchadd command.
6. Install ses driver patch 110614-02.
7. Install Solaris driver patches.
The two patches may have been included in your operating system.
8. Install luxadm/libg_fc/liba5k patch 109529-06.
Patch 109529-06 may have been included with your operationg system. Use the
showrev command to see it it has been included.
9. Install Network Storage Traffic Manager patch 111412-09.
10. Install the luxadm/liba5k and libg_fc patch 111413-08.
11. Install the luxadm/libg_fc/liba5k patch 111413-08.
12. Install fcp/fp/fctl/usoc drivers patch 111095-10.
# patchadd patch-location/111847-04
# patchadd patch-location/110614-02
# patchadd patch-location/108982-09
# patchadd patch-location/108984-08
# patchadd patch-location/
109529-06
# patchadd patch-location/111412-09
# patchadd patch-location/111413-08
# patchadd patch-location/111413-08
# patchadd patch-location/111095-10