Installation guide
Table Of Contents
- Contents
- Using UNIX Commands
- Typographic Conventions
- Shell Prompts
- Related Documentation
- Accessing Sun Documentation Online
- Sun Welcomes Your Comments
- New Features
- Features, Benefits, and Products
- SAN 4.0 Device Names
- On-Demand Node Creation
- Fabric Connection of Hosts
- Cascading of Switches
- Higher Realized Bandwidth
- Support of Multiple Protocols
- Support for More, Heterogeneous Storage Devices
- Support for New Hardware and Software
- Software and Hardware Upgrade
- Building Blocks for More Complex Topologies
- Overall Installation Order
- Configuring the Switch Ethernet Port
- Installing SAN Software for the First Time
- Upgrading Existing SAN Software
Appendix A Alternate Installation of a New SAN 21
PatchPro Interactive
▼ To Download Patches
1. At http://sunsolve.sun.com, select Patches from the menu at the left.
2. From the pulldown search menu select Storage Product.
The PatchPro page appears.
3. Select Network Storage Products.
The PatchPro Interactive page appears.
4. Select the PatchPro Interactive link.
5. Select StorEdge SAN 4.0 Release, if you have a SANbox2, or Brocade SAN
Release.
6. At the bottom of the page, click Generate Patch List.
A list of required patches in the correct installation order appears.
7. Download the patches.
Installing the Software
Use patchadd to install the recommended patches in sequence.
TABLE A-2 lists the required software.
TABLE A-2 Software Installation Sequence
Patch or Package Software
Solaris 8 Solaris 8 10/01
8_Recommended Solaris 8 Recommended and Security patch cluster
SUNWsan Sun StorEdge Network Foundation Software
SUNWcfpl cfgadm plug-in 32-bit package
SUNWcfplx cfgadm plug-in 64-bit package