User`s guide

2 – QLA2310/2310F/2310FL
Label
2-14 FC2354601-00 E
Q
2.5
Label
The transceiver on the QLA23xx HBA is a Class I laser product. It complies with
IEC 825-1 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be
operated under recommended operating conditions.
2.6
Agency Certification
2.6.1
QLA2310
The following sections contain a summary of EMC/EMI test specifications performed
on QLA2310 (FC2210401) to comply with radiated emission, radiated immunity and
product safety standards.
2.6.1.1
EMI and EMC Requirements
The QLA2310 conforms to the following requirements:
n FCC Part 15, Class B
q Radiated Emission Class B
q Conducted Emission Class B
Connectors QLA2310: HSSDC connector that supports copper cabling. Fibre
optic support available using an external MIA
QLA/2310F/2310FL: LC-style connector that supports non-OFC,
multimode fibre optic cabling using a small form factor optical
transceiver module
Form factor 17.78 cm×10.67 cm (7.0"× 4.2") (QLA2310/2310F)
16.93 cm×5.15 cm (6.7"× 2.5") (QLA2310FL)
Operating power Less than 15 watts
Table 2-2. QLA2310/2310F/2310FL Board Specifications (Continued)
Type Specification
CLASS I LASER PRODUCT