User`s guide

19 – SANblade Control VIX Application for Windows 2000
Configuring the Host
19-20 FC2354601-00 E
Q
n Max Registered MBytes. This parameter specifies the total amount of memory
(in MBytes) that can be registered per adapter. The default is 1024.
n Max Registered Regions. This parameter specifies the maximum number of
memory regions that can be registered per adapter. The default is 4096.
n Max Registered RDMA MBytes. This parameter specifies the maximum amount
of RDMA enabled memory (in MBytes) that can be registered per adapter. The
default is 512.
n Max Transfer Size. This parameter specifies the maximum size of a message
transferred between two VI nodes. The default is 65536.
n Max CQs. This parameter specifies the maximum number of completion queues
that are supported per adapter. The default is 1024.
n Max CQ Entries. This parameter specifies the maximum number of entries per
completion queue. The default is 8192.
n Max VIs. This parameter specifies the maximum number of supported VIs per
adapter. The default value is 1024.
n Max PTags. This parameter specifies the maximum number of supported PTags
per adapter. The default value is 2048.
n Send Descriptor Quota. This parameter specifies the maximum number of send
descriptors per VI that are queued on the adapter. The default value is 8.
n Recv Descriptor Quota. This parameter specifies the maximum number of
receive descriptors per VI that are queued on the adapter. The default value is 8.
n Host File. This field displays the name of the host file that contains the IP
addresses for the adapters. See section 19.6 for instructions on changing the
host file.
After configuring the host parameters, click Update. To return the parameters to
their default values, click Default.
Send Descriptor Quota 1–1024 8
Recv Descriptor Quota 0–1024 8
Host File — \WINNT\system32\
drivers\etc\hosts
Table 19-1. Host Settings (Continued)
Setting Options Default