User`s guide

19 – SANblade Control VIX Application for Windows 2000
Configuring the Host
FC2354601-00 E 19-19
Q
19.7
Configuring the Host
After enabling VI on the HBAs, make any necessary changes to the host VI settings.
To change the host settings, follow these steps:
1. Click a host in the HBA tree on the left side of the screen. The host tabbed
pages are displayed on the right side of the screen.
2. Click the VI tab. The VI tabbed page displays (see figure 19-20).
Figure 19-20. VI Tabbed Page (Host)
The default settings for the QLA2350/2352 adapter are listed in table 19-1 and
described in the following paragraphs.
Table 19-1. Host Settings
Setting Options Default
Max Registered MBytes 16–65536 512
Max Registered Regions 16–65536 4096
Max Registered RDMA MBytes 0–512 512
Max Transfer Size 1024–262144 65536
MAX CQs 16–4096 1024
Max CQ Entries 16–65536 8192
Max VIs 16–2048 1024
Max PTags 16–16383 2048