User`s guide

19 – SANblade Control VIX Application for Windows 2000
Enable VI and Assign IP Addresses
FC2354601-00 E 19-17
Q
Repeat these steps for each HBA in your system that requires VI support. Next,
add the IP addresses to the host file by following these steps:
1. Click Edit Hosts. The vi hosts window displays (see figure 19-18).
Figure 19-18. VI Hosts
c. Enter all the IP addresses in this file.
d. From the File menu, click Save. Enter a file name and location.
2. Click a host in the HBA tree on the left side of the screen. The host tabbed
pages are displayed on the right side of the screen.