User`s guide

18 – SANblade Control FX Wizard for Windows NT/ Windows 2000
Configuring HBAs in SANblade Control FX Wizard
18-4 FC2354601-00 E
Q
From this screen, select the HBA you want to configure:
n Double-click the row containing the HBA. Or
n Click the row containing the HBA, then click Next.
You can only configure one HBA at a time. If you have more than one HBA in the
system, the QLogic Configuration Wizard will prompt you to configure additional
HBAs once you have completed configuring the HBA selected in this screen.
18.4.3
Verify HBA and Driver Information
After selecting an HBA, the HBA Information screen displays (see figure 18-3).
Figure 18-3. HBA Information Screen
The HBA Information screen displays the following information about the selected
HBA:
n HBA model
n Node name
n Port name
n Driver version
n BIOS version