User`s guide

17 – SANblade Control FX Application for Windows NT/ Windows 2000
Configurating the HBA
17-34 FC2354601-00 E
Q
17.7.4.2
Updating the BIOS
When you click the Utilities tabbed page, the Update NVRAM radio button is
selected (see figure 17-23).
Figure 17-23. Utilities Tabbed Page (Update BIOS)
Perform the following steps to update the BIOS:
1. Click the Update BIOS radio button.
2. Click Select Input File to select the file from which to update. Make sure you
select the correct file. It must end with a .bin extension and have 131072 bytes
of data.
CAUTION!
Using the wrong file can render the HBA and the operating system
unusable.
3. Once you select the correct file, the Update button is active. Click Update to
update the BIOS.
Once the BIOS is updated, the status of the update is displayed in the Update
Status box at the bottom of the page.