User`s guide

16 – SANblade Control FX Wizard for Solaris
Configuring HBAs in SANblade Control FX Wizard
16-8 FC2354601-00 E
Q
If you want to save a copy of the configuration information, click the Export Log to
File button. You are prompted to select a file name and save the information.
If you want to save this configuration, click the Save button. To make any changes,
use the Back button to retrace your steps to the appropriate screen.
16.4.7
HBA Configuration Status
If you click the Save button from the Confirm Changes screen, the HBA
Configuration Status screen displays (see figure 16-7).
Figure 16-7. HBA Configuration Status Screen
If you want to configure another HBA, click the Yes radio button, then click Next.
The HBA Selection Screen appears, where you can select the next HBA (see
section 16.4.2).
If you do not want to configure another HBA, click the No radio button, then click
Next (see section 16.4.8).
If you have only one HBA in the system, the option for configuring another HBA is
not displayed.