User`s guide

16 – SANblade Control FX Wizard for Solaris
Configuring HBAs in SANblade Control FX Wizard
FC2354601-00 E 16-5
Q
16.4.4
Update the HBA Connection Settings
After verifying the HBA and driver information, the HBA Connection Settings
screen displays (see figure 16-4).
Figure 16-4. HBA Connection Settings Screen
Define the type of connection you want to use when the system boots. The following
options are available:
n Loop only
n Point-to-point only
n Loop preferred, otherwise point-to-point (default)
Select the data rate. The following options are available:
n 1 Gbps. The HBA runs at 1 Gbps. (This is the default setting.)
n 2 Gbps. The HBA runs at 2 Gbps.
n Auto negotiate. The system determines what rate it can accommodate and sets
it accordingly.
After making selecting the HBA connections settings, press the Next button.