User`s guide

16 – SANblade Control FX Wizard for Solaris
Configuring HBAs in SANblade Control FX Wizard
FC2354601-00 E 16-3
Q
16.4.2
Select an HBA to Configure
If you click the Next button, the HBA Selection screen displays (see figure 16-2).
Figure 16-2. HBA Selection Screen
The following information is shown for each HBA:
n Port name. Word wide port name of the HBA
n Node name. Word wide node name of the HBA
n Instance. The instance number of the HBA as assigned by the operating system
(OS)
n Configured. If this HBA has been configured by the SANblade Control FX Wizard,
the check box is selected and the corresponding row is light grey.
From this screen, use the option buttons to select the HBA you want to configure.
You can only configure one HBA at a time. If you have more than one HBA in the
system, the QLogic Configuration Wizard will prompt you to configure additional
HBAs once you have completed configuring the HBA selected in this screen.
After selecting an HBA to configure, press the Next button.