User`s guide

15 – SANblade Control FX Application for Solaris
Configurating the HBA
15-32 FC2354601-00 E
Q
15.6.4.1
Update the NVRAM
When you click the Utilities tabbed page, the Update NVRAM option button is
selected (see figure 15-21).
Figure 15-21. Utilities Tabbed Page (Update NVRAM)
Perform the following steps to update the NVRAM:
1. Click the Select Input File button to select the file from which to update. Make
sure you select the correct file. It must end with a .dat extension and have
256 bytes of data. You can get the file from the QLogic web site
(www.qlogic.com
) or service personnel. Note that NVRAM files are different for
different HBAs: for example, the NVRAM file for the QLA22xx HBAs is different
from the NVRAM file for the QLA23xx HBAs).
CAUTION!
Using the wrong file can render the HBA unusable.
2. After selecting the file, click the Update button to flash the NVRAM.
Once the NVRAM is updated, the status is displayed in the Update Status box at
the bottom of the page.