User`s guide

15 – SANblade Control FX Application for Solaris
Configurating the HBA
15-24 FC2354601-00 E
Q
15.6.1.3
Advanced Firmware Parameters
This part of the HBA Options tabbed page contains firmware parameter settings
that you can update to tune or troubleshoot a support issue (see figure 15-17).
Figure 15-17. HBA Options Tabbed Page (Advanced Firmware Parameters)
The advanced firmware parameters are described in the following paragraphs:
n Enable Adapter Hard Loop ID. Select this check box to force the HBA to attempt
to use the ID specified in the Hard Loop ID option. By default, the Enable
Adapter Hard Loop ID check box is cleared.
n Enable LIP Full Login. Select this check box for the ISP chip to re-login to all
ports after any loop initialization process (LIP). By default, this check box is
cleared.
n Enable Class 2 Service. Select this check box to provide Class 2 service
parameters during all automatic logins (loop ports). By default, this check box is
cleared.