User`s guide

15 – SANblade Control FX Application for Solaris
Configurating the HBA
15-20 FC2354601-00 E
Q
15.6.1.1
Host Parameters
The host parameters are illustrated in figure 15-15.
Figure 15-15. HBA Options Tabbed Page (Host Parameters)
This part of the HBA Options tabbed page allows you to configure the following
host parameters:
n Connection Options. This setting defines the type of connection (loop or
point-to-point). Select one of the following from the drop-down list:
q Loop Only
q Point-to-Point Only
q Loop Preferred, Otherwise Point-to-Point (default)
n Port Down Retry Count. This setting specifies the number of times the software
retries a command to a port returning port down status. The default is 8 retries.
Enter a value in the range 0–255.