User`s guide

13 – Solaris SPARC Driver and SANblade Control FX Installation
FCode
13-6 FC2354601-00 E
Q
14. Type y and press ENTER to continue the driver installation. The pkgadd
program notifies you when the SDM library installation is complete. For
example:
Installing QLogic SDM Library as <QLSDMLIB>
## Installing part 1 of 1.
/tmp/hba.conf
/usr/lib/libqlsdm.a
/usr/lib/libqlsdm.so
[ verifying class <none> ]
## Executing postinstall script.
Setting up QLSDM library...
Installation of <QLSDMLIB> was successful.
15. The pkgadd program then installs the SANblade Control FX GUI. You are
notified when the installation is complete. For example:
Processing package instance <scfx2-6> from
</tmpdir/qla2300_pkg>
QLogic SANblade Control FX (HBA Configuration Utility)
(sparc) Solaris 2.6, 7 Rev=X.XX
## Executing checkinstall script.
## Processing package information.
## Processing system information.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
Installing QLogic SANblade Control FX (HBA Configuration
Utility) as <scfx2-6>
## Installing part 1 of 1.
/opt/QLogic_Corporation/SANblade_Control_FX/Apphelp.html
/opt/QLogic_Corporation/SANblade_Control_FX/Wizhelp.html
/opt/QLogic_Corporation/SANblade_Control_FX/checkbackups
/opt/QLogic_Corporation/SANblade_Control_FX/readme.txt
/opt/QLogic_Corporation/SANblade_Control_FX/scfx
[ verifying class <none> ]
Installation of <scfx2-6> was successful.
16. Type the following text to restart and reconfigure the system:
reboot -- -r
13.6
FCode
If you need FCode, see the appropriate section for instructions on how to install or
update the FCode on the QLA23xx HBA.