User`s guide

10 – Windows XP Driver Installation
Removing the Driver
10-6 FC2354601-00 E
Q
7. Insert the driver disk created in section 10.2. Click Have Disk.
8. In the Copy manufacturer’s files from dialog box, type the following:
A:\
Click OK.
9. When the Hardware Update Wizard/Select a Device Driver dialog box
displays, click Next.
10. When the Hardware Installation dialog box displays, select Continue
Anyway.
11. When the Hardware Update Wizard/Completing the Upgrade Device Drier
Wizard dialog box displays, click Finish.
12. When the QLogic QLA23xx PCI Fibre Channel Adapter Properties dialog
box displays, click Close.
13. The following message displays:
Your hardware settings have changed. You must restart your
computer for these changes to take effect. Do you want to
restart your computer now?
Click Yes.
10.4
Removing the Driver
Power down your computer and remove the HBA from your computer according to
the manufacturer’s instructions; the HBA removal also removes the driver.
NOTE: You do not have to use the Device Manager or the Hardware Wizard to
uninstall the QLA23xx HBA. After you have removed the HBA and
restarted your computer, Windows XP recognizes that the HBA has been
removed.
10.5
System Registry Parameters
The available driver parameters are listed below and described in the following
sections:
n MaximumSGList
n NumberOfRequests
n UseSameNN