User`s guide

9 – Windows 2000 Driver Installation
QL2x00IP NDIS Network Driver Installation
FC2354601-00 E 9-13
Q
Perform the following steps to make QL2x00IP NDIS driver parameter and IP
address modifications:
1. Click Start, point to Settings, point to Control Panel, and double-click the
Network and Dial-Up Connections icon.
2. Right-click the Local Area Connection icon for the QLA23xx HBA, then click
Properties.
NOTE: If your system has multiple Local Area Connection icons, select the
connection that uses the QLA23xx HBA that you are modifying.
3. In the Local Area Connection n Properties dialog box, select Internet
Protocol (TCP/IP).
4. In the Internet Protocol (TCP/IP) Properties dialog box, select Use the
following IP address, then click Properties.
5. Type an IP address and subnet mask for the QLA23xx HBA. Each IP address
must be unique and all QLA23xx HBAs must use the same subnet mask. For
example:
Adapter 1
IP address: 10.0.0.1
Subnet mask: 255.255.0.0
Adapter 2
IP address: 10.0.0.2
Subnet mask: 255.255.0.0
6. Click OK.
7. In the Local Area Connection n Properties dialog box, click Configure.
8. In the QLogic QLA2X00 PCI Adapter #n Properties dialog box, click the
Advanced tab.
9. The Property list displays the configuration parameters. Click the parameter
that you want to modify. The values display to the right.
10. Make configuration parameter modifications as necessary, then click OK.
11. In the Local Area Connection n Properties dialog box, click OK.
12. Restart the computer.
9.7.4
Removing the QL2x00IP NDIS Driver
If you need to remove the QLA2x00IP NDIS driver, perform the following steps:
1. Click the Start button, point to Settings, and then click Control Panel.
2. Double-click the Add/Remove Hardware icon.
3. The Add/Remove Hardware Wizard welcome screen displays. Click Next.