User guide

E–ULP Troubleshooting
Troubleshooting SRP Issues
IB0054606-02 A E-11
Solution:
Perhaps an interswitch cable has been disconnected, or the VIO hardware is
offline, or the Chassis/Slot does not contain a VIO hardware card. Instead of
looking at this file, use the ib_qlgc_srp_query command to verify that the
desired adapter port is in the active state.
Session in 'Connection Rejected' state
Problem:
The session is in the 'Connection Rejected' state according to
/var/log/messages. If the session is part of a multi-session adapter,
ib_qlgc_srp_stats shows it in the "Connection Rejected" state.
A host displays
"Connection Failed for Session X: IBT Code = 0x0
"Connection Failed for Session X: SRP Code = 0x1003
"Connection Rejected"
NOTE
It is normal to see the "Can not find a path" message when the system
first boots up. Sometimes SRP comes up before the subnet manager has
brought the port state of the adapter port to active. If the adapter port is not
active, SRP will not be able to find the VIO hardware card. Use the
appropriate OFED command to show the port state.