User guide

B–SRP Configuration
QLogic SRP Configuration
IB0054606-02 A B-7
Enter ib_qlgc_srp_build_cfg. The system provides output similar to the
following:
# qlgc_srp.cfg file generated by
/usr/sbin/ib_qlgc_srp_build_cfg, version 1.3.0.0.17, on Mon
Aug 25 13:42:16 EDT 2008
#Found QLogic OFED SRP
registerAdaptersInOrder: ON
#
=============================================================
# IOC Name: BC2FC in Chassis 0x0000000000000000, Slot 6, Ioc 1
# IOC GUID: 0x00066a01e0000149 SRP IU SIZE : 320
# service 0 : name SRP.T10:0000000000000001 id
0x0000494353535250
session
begin
card: 0
port: 1
#portGuid: 0x0002c9030000110d
initiatorExtension: 1
targetIOCGuid: 0x00066a01e0000149
targetIOCProfileIdString: "FVIC in Chassis
0x0000000000000000, Slot 6, Ioc 1"
targetPortGid: 0xfe8000000000000000066a01e0000149
targetExtension: 0x0000000000000001
SID: 0x0000494353535250
IOClass: 0xff00
end
adapter
begin
adapterIODepth: 1000
lunIODepth: 16
adapterMaxIO: 128
adapterMaxLUNs: 512
adapterNoConnectTimeout: 60
adapterDeviceRequestTimeout: 2
# set to 1 if you want round robin load balancing
roundrobinmode: 0
# set to 1 if you do not want target connectivity
verification