User guide

6–SHMEM Description and Configuration
Installation
6-2 IB0054606-02 A
The -qlc suffix denotes that this is the QLogic PSM version.
 MVAPICH version 1.2.0 compiled for PSM. This is provided by QLogic IFS
and can be found in the following directories:
/usr/mpi/gcc/mvapich-1.2.0-qlc
/usr/mpi/intel/mvapich-1.2.0-qlc
/usr/mpi/pgi/mvapich-1.2.0-qlc
The -qlc suffix denotes that this is the QLogic PSM version.
 MVAPICH2 version 1.7 compiled for PSM. This is provided by QLogic IFS
and can be found in the following directory:
/usr/mpi/gcc/mvapich2-1.7-qlc
/usr/mpi/intel/mvapich2-1.7-qlc
/usr/mpi/pgi/mvapich2-1.7-qlc
The -qlc suffix denotes that this is the QLogic PSM version.
It is recommended that you match the compiler used to build the MPI
implementation with the compiler that you are using to build your SHMEM
application. For example, if you are using the Intel compilers to build your SHMEM
application and wish to run with Open MPI then use the Intel build of the Open
MPI library:
/usr/mpi/intel/openmpi-1.4.3-qlc
The following C compilers are supported:
 gcc (as provided by distro) in 64-bit mode
 Intel 12.1 C compiler in 64-bit mode
 PGI 11.7 C compiler in 64-bit mode
For more information or to perform and installation with SHMEM enabled refer to
Section 4 of the QLogic Fabric Software Installation Guide.