Product specifications

2–System Issues for Release 7.0.1
Known Issues
2-6 D000069-024
IFS/
Install/Uninstall
Major When installing the QLogic-Basic (QLogic
OFED+) or QLogic-IFS SW on SLES11SP1,
there may be conflicts with software that is
already installed on the system. The following
message may appear:
error:
%preun(ofed-1.4.2-0.9.6.x86_64)
scriptlet failed, exit status 1
error:
%preun(opensm-3.2.6_20090317-0.1.42
.x86_64)scriptlet failed, exit
status 1
Unable to uninstall previous OFED
RPMs
Manually uninstall the old version OFED before
you install the newer software.
1. As root, run the following command:
rpm -e --noscripts ofed
2. Re-run the normal installation.
IFS/
MPI
Major If LD_LIBRARY_PATH is exported inconsistently
with the version of openmpi being used,
applications may build or run incorrectly. This
issue can impact FastFabric tools that use MPI,
rebuilding of mpi apps, or rebuilding openmpi
itself using the do_build or
do_openmpi_build tools.
When using openmpi, make sure PATH and
LD_LIBRARY_PATH are not exported specifying
a different path than the openmpi path that is
being used. The mpi-selector can configure a
LD_LIBRARY_PATH for subsequent log ins.
openmpi does not require the
LD_LIBRARY_PATH to be set.
IB Third Party/
PCM/LSF
Major The FastFabric and Fabric Viewer options do
not show on the PCM GUI with RHEL 5.6 and
SLES 11 SP1.
Refer to Special PCM Installation for RHEL 5.6
and SLES 11 SP1 in Section 1 for special
instructions to install the PCM on a system with
RHEL 5.6 or SLES 11 SP1 Operating Systems.
Table 2-2. Open Issues
Product/
Component
Severity Description Workaround