Product specifications

1–Overview of the Release
Product Limitations
D000069-024 1-13
could become inconsistent and cause unreliable operation, in which case
subsequent runs of ./INSTALL or iba_config may make incorrect
conclusions about the configuration of the system and consequently make
incorrect recommendations. If the system becomes inconsistently
configured, QLogic recommends running the ./INSTALL TUI and selecting
ReInstall on all components. Once the re-installation has started,
carefully review all prompts and choices.
 On SuSE systems, NETWORKMANAGER must be set to “no” in
/etc/sysconfig/network/config. This is the default setting.
 The mpirun command in this release is not compatible with nodes running
InfiniPath releases prior to version 2.2.1.
 OFED SDP has not been qualified for this release. IPoIB is recommended
for data transfers.
Product Limitations
The following is a list of product limitations for this release:
 QLogic products will auto-negotiate with devices that utilize IBTA-compliant
auto-negotiation. When attaching QLogic products to a third-party device,
the bit error rate is optimized if the third-party device utilizes
attenuation-based tuning.
 At the time of this release, Oracle has not certified InfiniBand adapters for
RDS. As a result, QLogic is unable to extend support for RDS.
 At the time of this release, the PathScale Compiler Suite is not supported for
SLES11. As a result, QLogic is unable to extend support for this
environment.