User`s guide

3 – Event Messages
Critical Events
3-14 59060-00 03
0
[C] [8600.0015] [PortApp] [Port: port_number] [Unresponsive device device_al_pa on port
port_number removed from the fabric.]
Meaning: A device on the loop port did not take a OPN off the loop destined
for it. This suggests either the device has been physically removed
or is faulty. It has been removed from \the fabric nameserver.
[C] [8700.0007] [EPort] [Port: port_number] [Received frame from address not in Access
Control List (ACL) hard zone (src address = FC_address, dest address =
FC_address)]
Meaning: The destination for the receive frame is in an ACL zone and the
source is not. The frame will not be forwarded.
[C] [8700.000D] [EPort] [Port: port_number] [Resetting Inter-Switch Link (ISL), a time out
value has been reconfigured.]
Meaning: The Resource Allocation (R_A_TOV) or Error Detect (E_D_TOV)
timeout value has been reconfigured. E_Ports will be automatically
reset to inform the neighbor switch of the change.
[C] [8700.000E] [EPort] [Port: port_number] [InteropCredit value was reconfigured,
resetting port.]
Meaning: The InteropCredit parameter has changed. The affected port will
be automatically reset.
[C] [8700.000F] [EPort] [Port: port_number] [Broadcast frame received & broadcast
disabled, discarding broadcast frames.]
Meaning: Broadcast is disabled and the switch has received a broadcast
frame. Enable broadcast to receive broadcast frames.
[C] [8700.0010] [EPort] [Port: port_number] [Inter-Switch Link (ISL) unstable. ISL init will be
held back until ISL up time is 5 seconds]
Meaning: The ISL is unstable indicating that the media module or the cable is
bad.
[C] [8F00.000C] From SANbox Manager: Fabric Status status
Meaning: The severity of the fabric status has changed. The description field
will show the reason for fabric status.
[C] [8F00.000D] From SANbox Manager: Switch Status status
Meaning: The severity of the switch status has changed. The description field
will show the reason for the switch status.
[C] [8F00:000E] From SANbox Manager: Link Status status
Meaning: The severity of the link status has changed. The description field
will show the reason for link status.