User`s guide

3 – Event Messages
Alarm Events
3-4 59060-00 03
0
[A] [1003.001F] [Failing remote zoning configuration, member limit for zone zone_name
exceeded, (size=number_of_zones, limit= maximum_number_of_zones)]
Meaning: The maximum number of members for the given zone has been
exceeded as a result of a zone merge.
Action: Reduce the number of members in the given zone on the remote
switch.
[A] [1003.0020] [Failing remote zoning configuration, total zone limit would be exceeded]
Meaning: The maximum number of zones has been exceeded on the switch
as a result of a zone merge.
Action: Reduce the number of zones on the remote switch.
[A] [1003.0021] [Failing remote zoning configuration, Zoneset is empty]
Meaning: An empty zone set was included as part of a zone merge and was
rejected.
Action: Modify the zoning database on the remote switch to remove or
correct the empty zone set.
[A] [1003.0022] [Unable to update zoning data base with newly activated zoneset
information, Zoning Save in Progress]
Meaning: Modifications were being made to the local zoning database while
a zone set was being activated or deactivated from a remote
switch.
Action: Avoid activating or deactivating a zone set while zoning changes
are being made anywhere in the fabric.
[A] [1003.002D] [Zone Merge response indicates failure to merge, Isolating link]
Meaning: The attempt to merge two fabrics failed because each active zone
set contained a zone with the same name, but different
membership.
Action: Edit the affected zone to remove the conflict or deactivate one of
the zone sets.
[A] [1003.003C] [Incompatible Zoning mode, Isolating link]
Meaning: The fabric contains switches with a mix of Interop Mode settings.
Action: Configure all switches in the fabric to have the same value for
Interop Mode.
[A] [1003.0040] [Zone Member type member_type unsupported.]
Meaning: An invalid zone member type was discovered in a zone. ACL hard
zone membership must be defined by domain_ID and port number.
Action: Correct the member type.