User`s guide

3 – Event Messages
Alarm Events
59060-00 03 3-3
0
[A] [1003.0015] [Zoneset Activation received from switch with domain domain_ID failed,
unknown zoneset zone_set_name]
Meaning: A zone set activation received from the named switch failed
because the zone set was not in the zoning database.
Action: Examine the named switch to verify that the zoning database is
correct.
[A] [1003.0017] [Activation of zoneset by management server failed due to port
port_number out of range.]
Meaning: A zone member defined by domain ID and port was received within
a management server AZSD command with a port number out of
range.
Action: Check management server application zoning configuration to
assure zone members are properly configured.
[A] [1003.0018] [Hard zone zone_name with non Domain/Port member reverting to Soft
Zone.]
Meaning: An attempt was made to assign a zone member to a hard zone by
FC address or world wide name. Hard zones require that
membership be defined by domain ID and port number.
Action: Redefine the zone member by domain ID and port number.
[A] [1003.001B] [Failing remote zoning configuration, total zoneset limit would be
exceeded]
Meaning: The maximum number of zone sets has been exceeded on the
switch as a result of a zone merge.
Action: Reduce the number of zone sets on the remote switch.
[A] [1003.001C] [Failing remote zoning configuration, total member limit would be
exceeded]
Meaning: The maximum number of zone members has been exceeded on
the switch due to a zone merge.
Action: Reduce the number of zone members on the remote switch.
[A] [1003.001D] [Failing remote zoning configuration, total zones in zonesets limit would
be exceeded]
Meaning: The maximum number of zones in zone sets has been exceeded
on the switch as a result of a zone merge.
Action: Reduce the number zones on the remote switch.