User`s guide

3 – Event Messages
Alarm Events
3-2 59060-00 03
0
3.1
Alarm Events
[A] [1003.0010] [Segmenting, zoneset zone_set_name not defined]
Meaning: In non-interop mode, there is a conflict in the zoning configuration,
causing the Inter-Switch Link (ISL) to isolate. The zone set is not
found within the local zoning data base while interop mode is
disabled.
Action: Contact your authorized maintenance provider.
[A] [1003.0011] [Segmenting, zoneset zone_set_name already active]
Meaning: In non-interop mode, there is a conflict in the zoning configuration,
causing the Inter-Switch Link (ISL) to isolate. A switch tried to
activate a zone set that is already active while interop mode is
disabled.
Action: Contact your authorized maintenance provider.
[A] [1003.0012] [Segmenting, zoneset zone_set_name merge conflict]
Meaning: In non-interop mode, there is a conflict in the zoning configuration,
causing the Inter-Switch Link (ISL) to isolate. After a zone merge
with interop mode disabled, two zone sets were discovered in the
local zoning database with the same name, but different
membership.
Action: Contact your authorized maintenance provider.
[A] [1003.0013] [Segmenting, zone zone_name merge conflict]
Meaning: In non-interop mode, there is a conflict in the zoning configuration,
causing the Inter-Switch Link (ISL) to isolate. After a zone merge
with interop mode disabled, two zone were discovered in the local
zoning database with the same name, but different membership.
Action: Contact your authorized maintenance provider.
[A] [1003.0014] [Segmenting, alias alias_name merge conflict]
Meaning: In non-interop mode, there is a conflict in the zoning configuration,
causing the Inter-Switch Link (ISL) to isolate. After a zone merge
with interop mode disabled, two aliases were discovered in the
local zoning database with the same name, but different
membership.