Specifications

Preliminary July 7, 2005 Monitoring the QLogic SANbox Fibre Channel Switch with NetCentral 3
SNMP configuration
Preliminary
SANbox #> admin start
4. Type the following command to configure the SNMP settings:
SANbox (admin) #> set setup snmp
5. Enter the IP address for the NetCentral server PC as Trap1Address. You can also
enter other SNMP monitoring stations in turn (Trap2Address, Trap3Address, etc.).
Be sure to enable traps for each monitoring station (Trap1Enabled set to True). The
following example shows a configuration with traps sent to a NetCentral server PC
with IP address 10.16.43.18:
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Trap Severity Options
---------------------
unknown, emergency, alert, critical, error, warning, notify, info, debug, mark
SnmpEnabled (True / False) [True]
Contact (string, max=64 chars) [ContactName]
Location (string, max=64 chars) [LocationName
Trap1Address (dot-notated IP Address) [10.16.43.18]
Trap1Port (decimal value, 1-65535) [162]
Trap1Severity (see allowed options above) [warning]
Trap1Version (1 / 2) [2]
Trap1Enabled (True / False) [True]
Trap2Addres (dot-notated IP Address) [0.0.0.50]
Trap2Port (decimal value, 1-65535) [162]
Trap2Severity (see allowed options above) [warning]
Trap2Version (1 / 2) [2]
Trap2Enabled (True / False) [False]
Trap3Address (dot-notated IP Address) [0.0.0.0]
Trap3Port (decimal value, 1-65535) [162]
Trap3Severity (see allowed options above) [warning]
Trap3Version (1 / 2) [2]
Trap3Enabled (True / False) [False]
Trap4Address (dot-notated IP Address) [0.0.0.0]
Trap4Port (decimal value, 1-65535) [162]
Trap4Severity (see allowed options above) [warning]
Trap4Version (1 / 2) [2]
Trap4Enabled (True / False) [False]
Trap5Address (dot-notated IP Address) [0.0.0.0]
Trap5Port (decimal value, 1-65535) [162]
Trap5Severity (see allowed options above) [warning]
Trap5Version (1 / 2) [2]
Trap5Enabled (True / False) [False]