Product specifications

Switch Command Line Interface
Groups and Commands
1-60 D000103-000 E
Sample Output 2:
NOTES: Use this command to configure the subnet manager. Changes to these
parameters do not take effect until the chassis management card(s) is rebooted.
This command is only available on the master chassis management card.
smShowLids
Displays the LID of the subnet manager.
Syntax:
Options:
Sample Output:
NOTES: Use this command to display the current LID of the subnet manager.
-> smconfig startAtBoot yes startOnSlaveCmu yes
Saving....
Saving complete...
smShowLids
None.
sm_state = MASTER count = 572781 LMC = 0, Topology Pass count = 339, Priority = 0, Mkey = 0x0
-----------------------------------------------------------------------------------------
QLogic 12300 GUID=0x00066a00da000000 172.26.2.2 MM 1, Ch
-----------------------------------------------------------------------------------------
Node[ 0] => 00066a000600013c (2) ports=24, path=
Port ---- GUID ---- (S) LID LMC _VL_ __MTU__ _WIDTH_ ____SPEED____ CAP_MASK N# P#
0 00066a000600013c 4 LID=0001 LMC=0000 8 8 2k 2k 4X 4X 2.5 2.5 00000a4a 0 0
4 0000000000000000 4 8 8 2k 2k 4X 4X 2.5/5 5.0 00000000 1
22 4 22
5 0000000000000000 4 8 8 2k 2k 4X 4X 2.5/5 5.0 00000000 1
23 4 23
6 0000000000000000 4 8 8 2k 2k 4X 4X 2.5/5 5.0 00000000 1
24 4 24
7 0000000000000000 4 8 8 2k 2k 4X 4X 2.5/5 5.0 00000000 2
24 7 24
8 0000000000000000 4 8 8 2k 2k 4X 4X 2.5/5 5.0 00000000 2
23 7 23
9 0000000000000000 4 8 8 2k 2k 4X 4X 2.5/5 5.0 00000000 2
22 7 22
22 0000000000000000 4 8 8 2k 2k 4X 4X 2.5/5 5.0 00000000 3
16 22 16
23 0000000000000000 4 8 8 2k 2k 4X 4X 2.5/5 5.0 00000000 3
18 22 18
24 0000000000000000 4 8 8 2k 2k 4X 4X 2.5/5 5.0 00000000 3
17 22 17
...