Product specifications
Switch Command Line Interface
Groups and Commands
D000103-000 E 1-51
Options:
Sample Output:
-s <ipaddress>
DNS server IP address in dotted notation format (xxx.xxx.xxx.xxx)
-d <domain name>
The local domain name where this switch is installed (limit 32 chars).
-e <1 or 0>
1 = enable the DNS resolver, 0 = disable the DNS resolver.
dnsParamsSet -e 0
MasterMM202-> dnsParamsShow
DNS Resolver : Disabled
DNS Server Address : xxx.xxx.xxx.xxx
Local Domain Name : st.qlogic.com
NOTE:
The DNS resolver cannot be enabled until both the server address and local
domain name have been configured. It is necessary to manually reboot the
switch in order to start or stop the DNS resolver.