Product specifications

Switch Command Line Interface
Groups and Commands
D000103-000 E 1-35
Sample Output:
NOTES: If the format is not specified, then the current format selection value is
displayed. When the format is 0, the SMA node description is in a verbose format.
When the format is one the format is brief. The brief format is more consistent with
the CLI/GUI Port Stat port naming.
fruInfo
Displays the EEProm contents.
Syntax:
Options:
Sample Output:
NOTES: The '-all' parameter performs this command against all available slots for
the device.
-> setIBNodeDescFormat
Format = 0
fruInfo [slot|'-all']
[slot]
Slot that you wish to display EEProm contents. Defaults to 0 (chassis EEProm)
-> fruInfo
xInfo_ChassisInfo:
RecType: 1 LastRec: 0 LenMult: 0
ReadOnly: 1 RecordFormat: 2 RecLen: 14
LogicalLen: 020
HdrChkSum: c6
ChassisGuid: 00066a000300012a
SlotCount: 1 (IB Mods in Chassis)
SlotNumbers: 81 (pairs:ext0|Slt1)
CmeAccess: 80 (bits:ext0|Slt1|Cme)
SlotNumber: 0 <-Record accessed via this slot
CmeAccessBits: 2 (Access slot relative)
ProxyAccess: 0 (Access slot relative)
LockDrivesCTR: 0 (Clear to Remove interlock)
MechLock: 1
NodeCount: 0
...