Product specifications

Switch Command Line Interface
Groups and Commands
D000103-000 E 1-27
Sample Output:
NOTES: This command is used to enable or disable user authentication on the
serial console. Use 1 as the only parameter to enable authentication, or 0 to disable
authentication. Exit and re-login for the setting to take effect. The login mode must
be set to 0 or 1 for authentication to take place on the serial port.
uiConfig
View or configure the user interfaces to this device.
Syntax:
Options:
Sample Output:
NOTES: There are several access methods for this device. With no arguments,
this command displays which access methods are available, and whether each
method is enabled or disabled.
-> serialAuthSet 1
Serial authentication set to enabled.
uiConfig [-telnet 0|1] [-https 0|1] [-http 0|1] [-ftp
0|1] [-snmp 0|1]
[telnet]
Enable/disable access to the device via telnet..
[https]
Enable or disable https access.
[http]
Enable or disable http access.
[ftp]
Enable or disable ftp access.
[snmp]
Enable or disable SNMP access.
-> uiconfig -telnet 0
Successfully modified configuration.
Option Value
-----------------------
telnet 0
http 1
https 0
ftp 1
snmp 1