Product specifications

Switch Command Line Interface
Groups and Commands
1-112 D000103-000 E
Sample Output:
NOTE: This command will set the MTU capability for both internal and
external switching. If the vlCap option is not specified, the command
defaults to the maximumVL(s) for the selected mtuCap. Calling this
function without an mtuCap designator displays the current value for
each port.
Calling this function with the [-bounce] option disruptively brings
active links down and back up so the links use the new setting
immediately. Otherwise the new setting will be used the next time
links retrain.
ismIslSetSpeed
Allows the user to view and set internal port link speeds.
Syntax:
Options:
Sample Output:
-> 1-> ismChassisSetMtu
L01P01 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P02 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P03 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P04 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P05 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P06 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P07 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P08 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P09 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P10 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P11 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
L01P12 MTUCap=4(2048 bytes) VLCap=4(8 VLs)
ismIslSetSpeed [speed] [bounce]
speedFlag
1=SDR 2=DDR 3=SDR/DDR 4=QDR 5=SDR/QDR 6=DDR/QDR 7=SDR/DDR/QDR
bounce
Brings the active links down and back up if a new value is set.
-> ismIslSetSpeed 2
L01S3Ba link speed is DDR
L01S1Ba link speed is DDR
L01S1Bb link speed is DDR
...