Product specifications

Switch Command Line Interface
Groups and Commands
1-106 D000103-000 E
Options:
Sample Output:
NOTE: This feature will log every time a counter has reached its maximum
capacity. This may be useful for diagnostics purposes, specifically
for bad cables. This feature is only available on certain switch
hardware platforms.
ismPortSet12x
Allows the user to view, set and unset port link width for specific port(s).
Syntax:
Options:
Sample Output:
NOTES: This command is included for backwards compatibility. The
ismPortSetWidth command is preferred. This command ONLY works on platforms
enable
Enable the auto-clear feature.
disable
Disable the auto-clear feature.
warn
Generate warning log messages instead of the default information messages.
log_first
Log first clear (otherwise the first clear is not logged).
-> ismAutoClearConf enable
Auto clear is enabled
ismPortSet12x portName [enable8xBit] [-bounce]
portName
A valid 6 or 7 character port name (e.g., S1AL01a or L01P01).
enable8xBit
2=enable(8X only) 1=enable(AUTO 1X/4X/8X), 0=disable.
-bounce
Brings the active links down and back up if a new value is set.
-> ismPortSet12x S1AL01a
S1AL01a 12x mode is DISABLED