Installation guide

D000140-001 D A-1
A QLogic 12000 Series
Product Specifications
Physical Specifications
All products within the 12200, 12300 and 12800 Director series are designed to be
installed in industry-standard 19-inch four-post server racks.
Racks should conform to conventional standards. Use the American National
Standards Institute (ANSI)/Electronic Industries Association (EIA) standard
ANSI/EIA-310-D-92 and International Electrotechnical Commission (IEC) 297.
These racks are commercially available in various depths. It is recommended to
use rack with minimum of 36" depth to facilitate cable installation and routing.
Other physical attributes are shown in the table below.
NOTE:
The 12000 series products should not be installed in two-post
telecommunication racks.
Table A-1. 12000 Physical Attributes
Model # 12200 12300
12800-0
40
12800-12
0
12800-18
0
12800-36
0
Height (rack
units/inches)
1U/1.75" 1U/1.75" 5U/8.75” 10U/17.5" 14U/24.5" 29U/50.7”
Depth (with-
out cables)
24” 25 3/4" (654mm)
Width 17.32" (440mm)
Max weight
(lb./kg.)
15/6.8 26/11.8 100/45.5 155/70.5 285/129.3 536/243.1