Installation guide

1–Installation
Bringing Up the System For the First Time
1-50 D000140-001 D
Figure 1-44. MRL Protective Label 3
3. After testing is complete at the staging area, reverse Steps 1 and 2 to
prepare the system for shipment to the end-user site (see Figure 1-45).
Figure 1-45. MRL Protective Label 4
User Site Installation
After final installation of a 12800-series switch is completed at the end user site:
1. Disengage the thumb screw and partially rotate the lever as shown in
Figure 1-46.
Figure 1-46. MRL Protective Label 5