Installation guide

1–Installation
Connect Equipment to the Ports and Power On the System
1-46 D000140-001 D
Connect Equipment to the Ports and Power On
the System
Figure 1-39. 12200 and 12300 Serial and Ethernet Ports
Figure 1-40. 12800 Series Serial and Ethernet Ports (SEEB Module)
NOTE:
Before connecting equipment, it is important to understand the locations of
the serial and Ethernet ports on the 12200, 12300 and 12800 series. For the
12200 and 12300, these are located on the switch IB port side. For the
12800 series, these are located on the Serial, Ethernet, Chassis EEPROM
Board (SEEB) modules. Each SEEB module communicates with a
Management Module (MM) on the opposite side of a 12800 chassis.