Installation guide

1–Installation
12800-360 Installation
D000140-001 D 1-45
12. Attach the cable management guides.
If applicable, attach the cable management guides to the front and rear EIA
mounting rails, and fasten with M6 screws to the pre-installed clip nuts. The
guides should be installed such that the wireframe supports line up with the
chassis leaf module slots. There are four (4) guides in the front of a rack and
four (4) in the rear of a rack.
Figure 1-38. Attaching Cable Management Guides
13. If applicable, replace the door(s) on the rack.