Installation guide

1–Installation
12800-360 Installation
D000140-001 D 1-41
Figure 1-34. Positioning the Switch
8. Installing the chassis in the rack: Align the chassis with the rack. Raise the
chassis using a pallet jack such that the bottom of the chassis is at or slightly
higher than the top surface of the support shelf pre-installed in the rack. Lock
the pallet jack wheels. Use a group of people to push the chassis from the
front to slide it off the pallet and on the support shelf. The chassis should be
inserted into the rack until the rear of the chassis base is against the rear
support bracket.